How to make your own Golf 3/Corrado VR6 Air Intake for $85

Have a cool mod or a repair procedure you would like to share with the rest of the club? This is the place for it.
Post Reply
User avatar
dubfanatic
CVO Forums User
Posts: 282
Joined: Wed Nov 19, 2003 11:48 am
Location: Chicago, IL

How to make your own Golf 3/Corrado VR6 Air Intake for $85

Post by dubfanatic » Fri Mar 04, 2005 9:51 am

Ok, now this setup only took about 1 hour to install and the fit and finish are quite acceptable considering the relatively low investment. The CAI sounds great and seems to perform well(its raining here so i cant really get on it) I was, however, able to punch it in 3-5 gears on the highway and as expected, I can already feel the motor pull thru higher Rpm's with more authority. Now I am pleased with this mod and its cost. Im a guy that likes more for less. This DIY CAI falls under that category. Now if I could have spent another $180 and picked up a T2, I still woulda gone this route. Maybe the T2 woulda netted another 1.062 hp and maybe the pipe looks shinier than mine but until i see a dyno graph with the T2 makin the DIY look silly, this is the recommended route for those of us who would rather spend that $180 elsewhere. :thumbup: *92-00 Civic Intake pipe from Autozone $40*K&N CAI Element from Summitracing.com $35+shippingClick on this part number to go to the filter I used:KNN-RU-2430*nice 3" pipe coupler from a local hardware store $4*me relocating my charcoal canister to my storage cabinet FREE This is the K&N next to my cheeseball autozone filterThis is the final version of the finished productHere is was after 7 months, update on the Civic intake. Some have said that the pipe will rust quickly on the inside while maintaining its shiny appearance on the outside. So I pulled the intake off after all those months and after driving in the salt and snow.Still looks good to me. Modified by dubfanatic at 9:37 AM 8/23/2005

User avatar
valladar
CVO Forums User
Posts: 50250
Joined: Sun Jun 10, 2018 11:00 pm

Re: How to make your own Golf 3/Corrado VR6 Air Intake for $85

Post by valladar » Mon Aug 06, 2018 2:26 am

zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023
zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023
zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023
zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023
zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023
zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023
zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023
zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023
zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023
zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023
zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023zo46023
zo46023zo46023

Post Reply